hexsteel mesh standard

QB/T 2959-2008

 

hexsteel mesh which can reinforce high-temperature-resistance lining materials. It is made of carbon steel (A3F) or material 0Cr13. It is spot welded to the interior wall of the boiler or hot air tunnel, then coated with anti-fire material.

 

Advantages: The hexsteel mesh greatly strengthens the anchoring capacity of the mesh and lining material. It can control the heating layer from breaking and strengthen the firmness of the lining materials.

 

Material : used for pouring lining materials and strengthening of lining materials.
Materials available: A grade common carbon steel 0Cr13.1Cr13 or 0Cr18Ni9Ti. Pitch distance:  2cm-6cm. Mesh Thickness: 1cm-2.5cm. Sheet thickness: 1mm-3mm.

Sheet Size: We have supplied metal fittings for many factories, also supplied lining metal work pieces for many petroleum equipment manufacturers. Our products are widely used in large devices for petroleum chemical, especially for lining structures of main equipment of accelerators devices. A3F is the mostly used materials, while 1Cr13 alloy is applied for high temperature work condition. hexsteel mesh is made from 20*17.5 mm flat steel belt in a form of hexagonal grating for interior material strengthening.

hexsteel mesh: special coordinate with mechanical fixings of ZH-S compound spraying material . Steel code Q235A.

 

Introduction : 1) hexsteel mesh formed by pressing , 2) hexsteel mesh knot shoud be well-knit , distance no more than 0.3mm , 3) cross edge height is not bigger than 0.5mm