20 mesh plain SS mesh

20 mesh plain weave stainless steel wire mesh

Standard

u GB/T 5330.1-2000,  GB/T 19628.2-2005

u Anping Web Wire Mesh Co.,LTD Plain Weave Process and Technical Parameter

Brief description

20 mesh plain weave stainless steel wire mesh including 20 wires and openings of 1 inch Using 0.15-0.50mm diameter wire, by plain weaving, woven 20 mesh opening for 0.7-1.1mm solid particles , it can also be used as a liquid, gas coarse filter support material or protective fabrics to use. This wire diameter and mesh with ratio reasonable, therefore weave structure is very strong. After 13 whole weaving process, so that the mesh surface flatness better

Material

u 200 series : 201 202 205

u 300 series : 301 302 304 304L 309 309S 310 310S 316 316L 321

u 400 series : 410 420 430

Technical parameter

roll width: 1.0-8.0m

roll length: 30m

Application

u Battery

u Discs, Filters

u Air Vents,

u Sifting Powders

u Process Screening and Sieving

u Hydraulic Filters

u Plastic Extrusion

u Laminate and Gasket Reinforcement

u Shale Shaker Screen 

u Sand Sieve 

u Filtration Support Material 

u Rangehood filter 

u Speakers Cover

u Microphones Cover

u Shielding 

u Door and Window Protection

u Test sieve 

u Barbecue,kitchenware 

u Drug Screening

u Water Pipe Filter

20 mesh plain weave stainless steel wire mesh packing

Stainless steel wire mesh is packed in rolls,winding on a paper tube,wrapped in moisture-proof paper

or plastic film, outside wooden cases or wooden pallet.