400 mesh twill SS mesh

400 mesh twill weave stainless steel wire mesh

Standard

u GB/T 5330.1-2000,  GB/T 19628.2-2005

u Anping Web Wire Mesh Co.,LTD Twill Weave Process and Technical Parameter

Brief description

400 mesh twill weave stainless steel wire mesh including 400 wires and openings of 1 inch Using 0.03mm diameter wire, by twill weaving, woven 400 mesh opening for 0.033mm liquid or gas filter . This wire diameter and mesh with ratio reasonable, therefore weave structure is very strong. After 13 whole weaving process, so that the mesh surface flatness better

Material

300 series: 316L

Technical parameter

roll width: 1.0-1.6m

roll length: 30m

Application

u Electronic Ciggaretts for Wicking Material

u Filters and Laboratories

u Vaporizers

u Decorative/Cosmetic Mesh

u Food Use

u Injection Powders

u Dusts Selection

u Screening Chemical Additives

u Oil Fine Filter

u Gas Flow Control

400 mesh twill weave stainless steel wire mesh packing

Stainless steel wire mesh is packed in rolls,winding on a paper tube,wrapped in moisture-proof paper

or plastic film, outside wooden cases or wooden pallet.