DN500 wire mesh demister

DN500mm wire mesh demister pads

Standard                                                                                    

u  HG/T 21618-1998 HG/T 21586-1998

u Anping Web Wire Mesh Co.Ltd. Wire Mesh Demister Pads Process and Technical Parameters      

Brief description

DN500mm wire mesh demister pads are made up knitted gauze pad and support grid of two parts, It is a gas-liquid separator , when the vapor through demister pads it can remove the water mist , its mainly application for separation of diameter greater than 3um ~ 5um droplets . We have a complete knitted mesh and demister pads production lines and many years production of experience , we can produce standard and non-standard specifications of the demister , it is widely used in tower of petroleum, chemical , environmental protection and other areas .

Material

u Stainless steel: 201, 202, 304, 304L, 316, 316L, 321, 430

u Nickel: nickel, nickel alloy2080, Monel400, Monel600

u PP: Polypropylene

u PE: Polyethylene 

Technical parameter

Note:

u D stands for nominal diameter

u H stands for height or thickness of demister pads

u The weight is calculated according to stainless steel,stainless steel density is 7.93g/cm³,nickel density

        is 8.90g/cm³,PP or PE density is 0.92g/cm³

Application

u Petrochemical

u Evaporators

u Phosphate

u Scrubber

u Steam drums

u Paper Making 

Packing

Demister Pads should be packed firmly and securely. When packing, demister pads are appears in blocks.They are wrapped with plastic film and outside with wooden cases or wooden pallets.We can also pack according to customer requirements.