. Operation Principle Demister pad is a device used for removing entrained liquid droplets from a gas stream. As the name indicates the demister is used for removal of the
. In the separation process, the droplets flow through the mesh pads and collide with the surface of the wire due to their inertia. The collected droplets coalescence
. Introduction Wire mesh demister also called mist eliminator, is essential in many process operations for the removal of entrained material in vapor flows. Demister p
. We can supply the following types of filter discs: Layer: single layer or multilayer Material: steel wire mesh, stainless steel wire mesh, copper wire mesh, brass wire
. There are many names for filter discs, including extruder screen, spot-welded and aluminum bound screen packs, Circular Extruder Screens, Multilayer Circular Extruder Screens,multiple screenpacks,
. Demister pads has a variety of shapes and sizes and can be installed horizontally or vertically. A typical horizontal demister pads made from steel knitted wire mesh, several feet in diameter and s
. Benefits Easy to install in all process equipment Most cost-effective solution when equipment sizes are set by other requirements High efficiency with low pressure drop Emer
. 1) Polyester fiber production. 2) Oil and fuel filtration. 3) Extrusion in lamination plants. 4) Extrusion in Multilayer film plants
. Steel is the typical metal used in cylindrical filters. Stainless steel is more expensive but is good material to avoid problems with rust. Cylindrical filters mesh varies f
. Introduction Cylindrical filters is available in single or multilayer cylindrical mesh packs in spot welded or aluminum border. It is durable and strong t
Support:NINEWIN INTERACTION