zhao@webwirecloth.com

DN400 demister mist eliminator

Hot Products
Related Knowledge
Introduction

Diameter:  DN400mm
Thickness:  100mm,150mm
Grating:  None,2*12.7,3*25,4*25mm
Material:  Stainless Steel,Nickel,Monel,PP,PE
Shape:  Round
Application:  widely used in tower of petroleum, chemical , environmental protection and other areas etc.

Add Inquiry
Description

DN400mm Demister Mist Eliminator


Standard

HG/T 21618-1998 HG/T 21586-1998

Anping Web Wire Mesh Co.Ltd. Wire Mesh Demister Pads Process and Technical Parameters


Brief Description of DN400 Demister Mist Eliminator

DN400mm wire mesh demister pads are made up knitted gauze pad and support grid of two parts, It is a gas-liquid separator , when the vapor through demister pads it can remove the water mist , its mainly application for separation of diameter greater than 3um ~ 5um droplets . We have a complete knitted mesh and demister pads production lines and many years production of experience , we can produce standard and non-standard specifications of the demister , it is widely used in tower of petroleum, chemical , environmental protection and other areas .

Material

Stainless steel: 201, 202, 304, 304L, 316, 316L, 321, 430

Nickel: nickel, nickel alloy2080, Monel400, Monel600

PP: Polypropylene

PE: Polyethylene

Material Grade

Separated Products

SS304

Clean water steam, non-corrosive vapors, ambient-temperature dilute nitric acid.

SS304L

Petroleum fractions, light hydrocarbons, crude oil processing.

SS316

Fatty acids, organic acids, reduced crude oil distillation.

SS316L

Acidic reduced crude, naphthenic acid streams, sulfur-bearing hydrocarbons.

Monel

Caustic soda (alkalis), non-oxidizing dilute mineral acids, marine environments.

Nickel

Concentrated caustic soda, food-grade processing.

Titanium

Wet chlorine gas (Cl₂), chlorine dioxide, brine, seawater, highly oxidizing acids (e.g., hot nitric acid).

Inconel

Hot phosphoric acid, highly concentrated fatty acids, dilute reducing/oxidizing acids, severe chemical waste, alkaline solutions, sour gas

Copper

Alcohols, aldehydes, ketones, amines, solvent recovery.

Polypropylene (PP)

Hydrochloric acid, hydrofluoric acid , general mineral acids.

PTFE

Concentrated sulfuric acid, ultra-pure chemicals, severe oxidizing environments.


DN400 Demister Mist Eliminator Technical Parameter



Note:

D stands for nominal diameter

H stands for height or thickness of demister pads

The weight is calculated according to stainless steel,stainless steel density is 7.93g/cm3,nickel density

is 8.90g/cm3,PP or PE density is 0.92g/cm3


DN400 Demister Mist Eliminator Application

Gas Turbine Air Intake Filtration

Fuel Cell Protection Modules Compressor Systems

Distillation & Separation,Pharmaceutical Fine Chemical Distillation

Green Energy & Decarbonization,Green Hydrogen Production,Oxygen/Hydrogen Gas-Liquid Separation


Wire Mesh Demister Packing

Demister Pads should be packed firmly and securely. When packing, demister pads are appears in blocks.They are wrapped with plastic film and outside with wooden cases or wooden pallets.We can also pack according to customer requirements.

Copyright©Web Wire Mesh Co.,Ltd.
Add: The East Zone Development Industry, Hebei, China 0086-311-89255081
zhao@webwirecloth.com
Statement: This website not allowed copy without permission

Support:NINEWIN INTERACTION

Close