zhao@webwirecloth.com

40 mesh nickel wire mesh

Hot Products
Related Knowledge
Introduction

Mesh:  40X40mesh
Wire Dia:  0.12-0.30mm
Aperture:  0.3-0.5mm
Material:  nickel/nickel alloy wire
Weave Type:  plain weave
Roll Width:  1.0m,1.2m,1.5m
Roll Length:  30m
Application:  Liquid/gas filters,EMI/RFI shielding mesh,Fuel cells/electrodes

Add Inquiry
Description

40 mesh plain weave nickel wire mesh


Standard

u GB/T 5330.1-2000,  GB/T 19628.2-2005

u Anping Web Wire Mesh Co.,LTD Plain Weave Process and Technical Parameter


Brief description

40 mesh plain weave nickel wire mesh including 40 wires and openings of 1 inch Using 0.12-0.30mm diameter wire, by plain weaving, woven 40 mesh opening for 0.3-0.5mm solid particles , it can also be used as a liquid, gas filter support material or protective fabrics to use. This wire diameter and mesh with ratio reasonable, therefore weave structure is very strong. After 13 whole weaving process, so that the mesh surface flatness better.


Material

u Pure nickel: N2 N4 N6

u Nichrome: Cr20Ni80


Technical parameter



roll width: 1.0-1.5m

roll length: 30m


Application

u Liquid/gas filters

u EMI/RFI shielding mesh

u Fuel cells/electrodes


40 mesh plain weave nickel wire mesh packing

Nickel wire mesh is packed in rolls,winding on a paper tube,wrapped in moisture-proof paper or plastic film,

outside wooden cases or wooden pallet.

Copyright©Web Wire Mesh Co.,Ltd.
Add: The East Zone Development Industry, Hebei, China 0086-311-89255081
zhao@webwirecloth.com
Statement: This website not allowed copy without permission

Support:NINEWIN INTERACTION

Close